P 3
Please retain product label and instructions for future reference
Remove transportation blocks from the
bottom of each panel before beginning
assembly. Each Panel should have two
blocks.
Pre Assembly
Pre Assembly
Follow the instructions for the 8x8 corner
Summerhouse (
03TGCOR0808-V4
), however
DO NOT
attach the Felt, Rear Cover Trims or
the Fascia trims.
Not attaching these parts allows the extension
to be fixed in place.
Your building should look as shown.
Step 1
Fix the T-hinges
(No.17)
to each of the
Doors
(No.6)
with 4x30mm screws per
hinge, making sure to screw into the
framing or the rear of the Door.
Once to T-hinges are fixed into position, lay
the Door Panel
(No.1)
flat on the ground.
Fix the Door in position using 3x30mm
screw per hinge.
To create a Master and Secondary door, fix the
Door Trims
(No. 12 & No. 13)
to one of the
doors overlapping with the other door
as shown using 3x20mm screws per trim.
6x20mm Screws
28x30mm Screws
1
12
13
17
6
30mm
screw
Pre drill
hole
20mm
screw
Step 2
Place the Floor
(No.4)
up against
the Corner Summerhouse on
a flat, level surface. Fix into
position using 4x60mm screws
as shown.
4x60mm Screws
**To position the side shed on the
right, position the floor on the
right and fix in the same way shown.
4
Pre drill
hole
60mm
screw
