Step 1
Insert the glazing sheet into the window rebate, ensure a
flush fit. Attach window beading with the 25mm glazing
pins provided, x4 pins per beading. When nailing pins
protect the glazing sheet with a piece of cardboard or
similar to avoid breakage and scratches.
48x25mm Nails
25mm
Nails
Step 2
Fix the T hinges to the top and bottom of
each door and a hinge in the middle, as
shown in the illustration using 30mm black
screws. Secure each door to the door gable
again using 30mm black screws.
44x30mm Black Screws
Pre drill
hole
30mm
screw
20
19
19
Step 3
Fix the door beading strips to the door gable
using 4x30mm screws for each strip.
Make sure to attatch the strips by screwing
into the door gable through the strip
12x30mm Screws.
30mm
screw
Pre drill
hole
30mm
screw
Pre drill
hole
26
27
P 3
Please retain product label and instructions for future reference
Please retain product label and instructions for future reference
24
24
23
23
23
24
24
33
12
12
15
15
Step 4
Attach the door strips to the master door,
securing into place using 3x30mm screws
per strip.
6x30mm Screws
