Step 13
Place the veranda floor to the front
of the building and secure in place
using 4x50mm screws as shown in
the illustration.
*Before fixing ensure the floor sits
centrally.
4x50mm Screws
Pre drill
hole
50mm
screw
Step 14
Locate the veranda side rails on to
the floor (
making sure the rails
are flush to the edge of the floor
)
and secure in place using 5x50mm
screws per side.
Fix a veranda supports to the front
of each rail with 2x50mm screws
per side.
14x50mm Screws
Pre drill
hole
50mm
screw
Step 15
Fix the cover trims to each corner of
the building and across the panel
joints on each side, securing the
trims in place with 18x30mm screws
18x30mm Screws
Pre drill
hole
30mm
screw
HANDLE
WITH CARE
1
2
3
4
Step 16
Cut the felt into 3 sheets and lay onto the
roof as shown in the illustration. Once
arranged secure the felt into position with
180x felt tacks at 100mm intervals.
*Ensure there is approximately 50mm of
overhanging felt around all sides.
180x Felt Tacks
Felt
tacks
P 6
Please retain product label and instructions for future reference
6
13
13
10
10
18
18
18
18
18
18