Side
Rear
Front
P4
Please retain product label and instructions for future reference
Step 1
Lay the base frame down as shown in the
diagram. Ensure the base is square and
layed on level ground. Fix the base
framing
(No. 11)
&
(No. 12)
together with
2 x 70mm screws per corner, pre drill to
avoid splitting the timber.
8x70mm screws.
Pre drill
hole
70mm
screw
Pre drill
hole
Step 2
Assemble the window panels on the floor.
Place the plastic window cill onto the lip
of the window panel externally.
1b. Lay the styrene on top of each open-
ing so that it overlaps the surrounding
framing equally on both sides as per the
diagram.
Step 3
Attach the window strips using 3x30mm
screws as per the diagram, starting with
the top strip. Ensure the framing does not
protrude the width of the window frame.
Ensure you screw into the window strips
to the side of where the styrene meets
the window frame.
81x30mm
11
11
12
12
Styrene
Styrene
Styrene
Window Cill
Styrene
24
24
24
25
27
26
Styrene
Styrene
Styrene
Styrene
Styrene
Styrene
34
35
36
30
30mm
screw
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.
