Pre drill
hole
70mm
screw
15
16
16
7
2
1
6
6
13
P 3
Please retain product label and instructions for future reference
Step 2: Plain Gable Assembly
Place the plain gable top (
No. 7
) onto
the back side panel (
No. 2
) and secure
from underneath through the framing
as shown in the illustration using
4x50mm screws.
*Ensure the framing is flush on the
flat edge.
4x50mm screws.
Pre drill
hole
50mm
screw
Step 1
Arrange the base frame(
s
)
(
No’s. 15 & 16
) onto your
base as shown in the
illustration.
Ensure your base is square
and layed onto a firm and
level surface that has suitable
drainage and is free from
areas where standing water
can collect.
4x70mm screws.
Step 3: Door Gable Assembly
Following the same method outlined
in
Step 2
, place the door gable top
(
No. 6
) onto the door side panel (
No. 1
)
and secure from underneath through
the framing using 2x50mm screws.
*Ensure the framing is flush on the
flat edge.
2x50mm screws.
Pre drill
hole
50mm
screw
Step 4: Door Gable Assembly
Attach the door frame (
No. 13
) to the
door gable assembly, fixing the frame
into the overhanging boards on the
door gable top (
No. 6
) using 2x50mm
screws.
*Ensure to screw into the framing on
the door gable top.
2x50mm screws.
Pre drill
hole
50mm
screw
