P 5
Please retain product label and instructions for future reference
9
5
6
6
5
10
7
Step 3
Parts Needed - No. 5 QTY 12
No. 6 QTY 12
No. 7 QTY 6
No. 9 QTY 5
No. 10 QTY 10
Following the same method
outlined in
Pre-Assembly
, lay
the first 6 boards (
No’s. 5, 6,
7, 9 &10
) onto the starter
boards to create your first level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the door
frame by 6 boards, refer to
door installation instructions, if
not, you can install the door at
step 5.
Step 4
Once you have laid 6 log boards (
off of
the starter
) up the door section, slide the
assembled door frame (
No. 1
) and
windows (
No. 2
) over the boards resting
the frame on top of the starter boards.
Please see instructions provided with
your doors and windows to assemble.
*Please note:
This image is for illustrative
purposes and may differ from your
choice in product (
regarding door/win-
dow position
). Nevertheless the process
of fitting the door frame is the same.
9
5
5
10
10
Step 5
Parts Needed - No. 5 QTY 24
No. 6 QTY 24
No. 7 QTY 12
No. 9 QTY 12
No. 10 QTY 24
Following the same method
outlined in
Pre-Assembly
, lay
the next boards (
No’s. 5, 6,
7, 9 & 10
) onto the assembly
until you reach the top of the
door panels.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame.
10
7
6
6
