P 5
Please retain product label and instructions for future reference
IMPORTANT:
Pre-drill before fixing screws.
Step 3
(See Pre-Assembly)
Parts needed - No. 9 QTY 5
No. 10 QTY 6
No. 11 QTY 5
No. 13 QTY 6
No. 19 QTY 12
No. 22 QTY 5
Following the same method
outlined in
Pre-Assembly
, lay
the first 6 boards (
No’s. 9, 10,
11, 13, 19 & 22
) onto the
starter boards to create your
first level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Please Note:
The short boards at the
front of the building (either side of
the door and window opening’s)
can be placed either side depending
on your needs.
9
22
11
19
13
10
19
Step 4
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame
(No.
2)
assembly over the boards resting
the frame on top of the starter board.
*Please note:
This image is for illustra -
tive purposes and may differ from
your choice in product (
regarding
door position
). Nevertheless the
process of fitting the door frame is
the same.
**Please Note:
The short boards at
the
front of the building (either side of
the door and window opening’s) can
be placed either side depending on
your needs.
