P 7
Please retain product label and instructions for future reference
Step 8
(See Pre-Assembly)
Parts needed - No. 8 QTY 12
No. 9 QTY 12
No. 10 QTY 6
No. 12 QTY 12
No. 13 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards
(No’s. 8,
9, 10, 12 & 13)
onto the
assembly to bring the board
level to the top of the window
and door frames.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame.
3
3
6
6
10
11
Step 9
(See Pre-Assembly)
Parts needed - No. 6 QTY 2
No.10 QTY 2
No. 11 QTY 1
Following the same method
outlined in
Pre-Assembly
, lay
the last two boards (
No. 6 &
10
)
and the board to go above
the door
(No. 11)
onto the
assembly.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 10
(See Pre-Assembly)
Parts needed - No. 3 QTY 2
Place the gable tops onto the
assembly. Fix into position by
screwing through the notches
as shown in the illustration.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
Pre drill
hole
70mm
screw
IMPORTANT:
Pre-drill before fixing screws.
10
9
9
13
12
13
12
8
8
