P9
Please retain product label and instructions for future reference
Step 7
Parts needed - No. 25 QTY 1
Make the log cabin level by
adding another board
(No. 25)
as shown in the diagram. Fix
using 1x70mm screw.
**Ensure to stagger the screws
so as not to collide with the
previous screw.
1x70mm Screws
Pre drill
hole
70mm
screw
25
IMPORTANT:
Pre-drill before fixing screws.
Left Handed
Right Handed
25
Step 8
Parts needed - No. 23 QTY 6
No. 24 QTY 6
No. 33 QTY 6
No. 36 QTY 5
Lay the first 6 boards (
No. 23, 24, 33, 36, 41, 83, 86 & 87
) onto the starter boards to create your first level, follow-
ing the method as shown in the illustrated.
Please note the right hand side of the door will be slightly higher. This will even out when the rest has been
assembled.
*Ensure that the boards are level and flush with each other as you lay each one.
Ensure the boards
(No.83 & 87)
are level, flush and in line with the boards next to them.
Secure every other board
(No. 83 & 87)
in place by screwing through the side of the board at an angle into the
end of the board next to it
(No. 41 & 33 left handed & 36 right handed)
, using 1x60mm screw per board.
6x60mm Screws
41
24
23
41
36
33
83
87
86
41
Left Handed
Right Handed
41
83
87
86
41
24
23
41
36
33
Rubber Mallet
may be required
to fit parts.
No. 41 QTY 17
No. 83 QTY 5
No. 86 QTY 5
No. 87 QTY 5
IMPORTANT:
Pre-drill before fixing screws.
Pre drill
hole
80mm
screw
