P 7
Please retain product label and instructions for future reference
6
5
10
13
10
5
12
Step 7
(See Pre-Assembly)
Parts needed - No. 5 QTY 6
No. 6 QTY 12
No. 8 QTY 6
No. 9 QTY 12
No. 10 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (No’s.
5, 6, 8, 9 & 10) onto the
assembly to bring the board
level to the top of the
window and door frames.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame.
IMPORTANT: Pre-drill before fixing screws.
3
3
Step 8
(See Pre-Assembly)
Parts needed - No. 5 QTY 1
No. 10 QTY 1
No. 12 QTY 1
No. 13 QTY 1
Following the same method
outlined in
Pre-Assembly
, lay
the last boards (No’s. 5, 10, 12
& 13).
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 9
(See Pre-Assembly)
Parts needed - No. 3 QTY 2
Place the gable tops (No. 3)
onto the assembly. Fix into
position by screwing
through the notches as
shown in the illustration.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
Pre drill
hole
70mm
screw
IMPORTANT: Pre-drill before fixing screws.
9
9
6
8
IMPORTANT: Pre-drill before fixing screws.
