Cellicon
TM
Perfusion Solution for Process Development User Guide
12
Settings
System Settings
General
Auto-resume
Allows the system to store the current
system state and setpoint. If power is lost,
the system recovers automatically when this
feature is enabled. An alert shows the system
has recovered its last working point using the
auto-resume feature.
Date & Time
Adjust the values up or down. Select
Done
when finished adjusting the values. The date
and time format is MM-DD-YYYY HH:MM.
Flip Display
Change the orientation of the display to
landscape, portrait or upside down.
Automatic Standby Mode
Locks the screen and displays a screensaver
after a defined period of inactivity (1 to 1000
minutes). Enable this feature by selecting
the checkmark next to
Enable automatic
standby mode
.
In standby mode, the screensaver shows the
following information:
Standby Mode with No Active Alerts
Standby Mode with Active Alerts
To unlock the screen, select
UNLOCK
and enter
user account credentials.
Data Logging
The beginning of the filename can be defined
by adding a log filename. The ending is fixed
and generated with the date followed by the
time when the logfile is created.
When data logging is switched
On
, a prompt
to enter a filename will appear. This filename
will replace the text in the log filename
region in the settings.
A USB drive must be inserted into the controller to
start the data logging. Data will be lost if the USB
drive is removed prior to ending the data logging.
The logfile is stored as a csv-file to the
subfolder/ logs on the USB drive.
The csv-file format allows a user to open the
logfiles with Microsoft Excel.
The data logging settings also define log
interval and the log file size.
Import/Export Settings
Settings can be imported via the USB drive.
By selecting
IMPORT
, if any settings file is
found it will be listed within the selection list
on the popup window and can be loaded onto
the controller. Existing controller settings will
be overwritten by the settings files imported
from the USB drive.
Import Settings Popup
Export Settings enables a user to store
all controller settings on a USB drive and
transfer them to another controller.
Factory Reset
By selecting
RESTORE
, all the settings will be
reset to the factory setting values.
Note All the existing controller settings will
be lost by restoring factory settings.
