Quick start
8
QUICK START
(after installation performed by a qualified field service representative)
Exit screensaver
A screensaver automatically appears after a few minutes if the HMI touchscreen is not used.
Screensaver
Tap anywhere on the screen or initiate a manual dispense by pressing the dispenser wheel to exit
the screensaver.
Dispense ultrapure water
It is a good practice to recirculate water for a minute or longer before dispensing.
To do this, press on the recirculation icon,
this also refreshes the water quality parameters:
• Product resistivity
• TOC
• Temperature
There are several options to dispense ultrapure water:
Manual Dispensing
To start dispensing in low flow, turn the dis-
pense wheel one notch counter-clockwise.
To start dispensing at full flow, press down on
the dispense wheel.
Adjust flowrate
Stop
To increase the flow rate keep turning the
wheel counter-clockwise until full flow is
reached. To decrease the flow rate, turn the
wheel clockwise.
Low flow
Full flow
To stop dispensing, press down on the wheel
or rotate the wheel clockwise until no more
water flows from the dispenser.
+
+
_
Recirculate
Home screen
Status bar
Home Menu
