background image

1111 N. Hadley Rd.

Fort Wayne, In. 46804

Tel. 800-701-2992

Fax (219) 436-0735   www.mercosavory.com

4

TOASTING HINTS

1.

Moisture content is the most important consideration in producing a consistently high quality product.  The moisture
content of the product must be as uniform as possible.

2.

It is not recommended that you toast refrigerated or frozen products.  Allow product to reach room temperature.

3.

Pre-spreading of products is not recommended before toasting or warming.  This can cause grease build-up in food
areas, smoke and unsanitary conditions and may void the warranty.

4.

Use a soft spread on finished product.

CLEANING AND MAINTENANCE

Merco/Savory toasters are designed for easy cleaning and minimum maintenance.  The stainless steel outer case requires
nothing more than a daily wiping with a damp cloth to retain its lustrous finish.  If however, excessive amount of grease and
dirt is allowed to collect, a non-abrasive cleaner (hot sudsy water) may be used.

Care must be taken to prevent water or cleaning compounds from getting on internal parts, especially the switches on the
control panel.

The unit is designed so that any crumbs which may collect in the base may be easily removed.  Simply lift out the receiving
tray and delivery chute and brush off the crumbs.  The heat reflector tray, located beneath the conveyor, should be re-
moved and cleaned daily.

The non-stick coated conveyor belt should be wiped clean daily.  This can be done by running the conveyor and wiping with
a damp cloth using a side to side motion.

WARNING:  ALL HEAT CONTROLS MUST BE OFF WHEN CLEANING CONVEYOR BELT.

WARRANTY

The RT-2T “Twin Toaster” carries a one year warranty on parts, two year warranty on heating elements and a 90 day
warranty on labor from date of purchase.  Damage resulting from accident, alterations, misuse, abuse, or failure to follow
use and care instructions or improper installation voids this warranty.  See warranty supplied with this unit for complete
details.

Summary of Contents for RT-2T

















Reviews: