Preventive Maintenance for Your Tanning Bed
Recommended Care
After Each Session
Weekly
Monthly
6 Months
Every 1000 hours
Clean acrylic surface
x
Clean pillow
x
Clean goggles
x
Inspect/clean vents
x
Clean exterior of bed
x
Inspect/clean reflectors
x
Inspect/clean lamps
x
Inspect/clean
underside of acrylics
x
Replace acrylics
x
Replace lamps
x
Cleaning and Acrylic Maintenance
IT IS NECESSARY TO THOROUGHLY CLEAN AND SANITIZE YOUR
ACRYLIC AFTER EVERY USE TO ENSURE CAREFREE OPERATION AND
TO MAXIMIZE ITS TANNING EFFICIENCY. THE ACRYLIC SHOULD BE
CLEANED WITH A NON-ABRASIVE DISINFECTANT THAT DOES NOT
CONTAIN AMMONIA AND/OR ALCOHOL. DO NOT USE COMMERCIAL
CLEANERS SUCH AS WINDEX
8
OR 409
8
.
USE OF AMMONIA AND/OR ALCOHOL ON YOUR ACRYLICS
WILL VOID THE WARRANTY!
Only use tanning bed cleaner, available at your authorized dealer. Spray the acrylic
lightly, and wipe with a soft cloth.
Take the following steps to maintain your acrylic:
•
When cleaning the tanning bed, use a cotton towel which is much less abrasive than
a paper towel. Never wipe with a dry cloth, as this will generate a slight static,
which attracts dust.
•
Do not use oils of any kind or lotions when tanning, except those approved
specifically for indoor tanning use, such as Electric Beach
TM
, available at your
authorized dealer. Products not approved for indoor use will break down the
acrylic.
•
In order to keep the acrylic from being scratched, jewelry should not be worn while
tanning.
www.mercola.com
14
