Pre-Installation Planning
- Before you begin to assemble your tanning bed,
please read the following.
Electrical Requirements
A qualified electrician may be needed to assist in fulfilling these requirements.
VERY IMPORTANT!
MUST READ!
NEMA 5-15R
This tanning system requires a NEMA 5-15R Receptacle and a DEDICATED 15 Amp
Circuit Breaker.
EVERY Tanning System REQUIRES a DEDICATED
Circuit Breaker.
This means that your tanning system is the ONLY
electrical device operating on that circuit breaker.
Proper voltage is ONLY between 100 and 130 Volts.
ALL IMPROPER VOLTAGES MUST BE RECTIFIED WITH THE CORRECT
BUCK BOOSTER TRANSFORMER!
Buck Boosters are available through your Tanning Bed Dealer.
See power cord label to determine voltage and receptacle requirements
Additionally a very easy way of protecting your tanning bed from
potential electrical damage due to power surges or spikes is to
UNPLUG
the unit when
NOT
in use.
Failure to comply with these electrical requirements will VOID
ALL WARRANTIES and will damage electrical components!
WARNING: HIGH LEAKAGE CURRENT – ENSURE PROPER GROUNDING.
WARNING: GROUNDING CIRCUIT CONTINUITY IS VITAL FOR SAFE OPERATION OF
EQUIPMENT. NEVER OPERATE WITH GROUNDING CONDUCTOR DISCONNECTED.
www.mercola.com
5