mcr PL1
overpressure-bleed damper
MERCOR SA –
The Company reserves the right to make modifications and changes.
8/9
Examples of multi-damper sets
A set of two dampers
A set of four dampers
6.4. ELECTRICAL CONNECTIONS ______________________________________________
A damper is an entirely mechanical device that features no electrical parts that would require electrical
connections.
7. TRANSPORT AND STORAGE CONDITIONS ________________________
The dampers are packed in cartons or placed on pallets. The dampers are protected against damage
using protective film or other covering material. The dampers may be transported using any means of
transport, provided that they are protected against weather conditions.
Dampers placed on means of transport should be protected against shifting during transport. After each
transport, each damper should be visually inspected. The damper must not be hit or dropped. During
handling and installation, attention should be paid to the damper baffle.
The dampers should be stacked in no more than 2 layers vertically, in closed rooms ensuring protection
against external weather conditions. In the case of storing of the dampers on the ground, they should be
placed on protective pads in order to protect the dampers against deformation and damage.
8. MAINTENANCE AND SERVICE_____________________________________
In order to ensure correct and undisturbed operation, the damper should be inspected and actuated on a
regular basis. The damper Manufacturer requires service inspections of the device to be performed once
per six months. Every inspection of the damper should be recorded in a required report. The service
inspection should be performed by the damper Manufacturer or by a company possessing adequate
Authorisation to perform service and surveys, issued by the Manufacturer.
