mcr WIP type multi-blade fire dampers
“MERCOR” S.A. –
the Company reserves the right to make modifications and changes.
5/15
Release and control mechanisms
The release and control mechanism of the mcr WIP type fire dampers may be one of the following:
Electric actuator:
Spring mechanism:
Main dimensions
Geat
A
C
BFN
125
325
BFL
125
275
BF
125
325
BF 24TL-ST
125
325
EXBF
175
400
RST-KW1
165
275
BE
125
275
BLE
125
325
Embed symmetrically with respect
to the axis of the wall
mcr WIP fire damper
5.
MANUFACTURER’S DESIGNATION OF THE FIRE DAMPER
mcr WIP / ...
B x H
/1
/2
/3
6. INSTALLATION OF THE FIRE DAMPER
NOTICE
During the installation of a fire damper and while conducting finishing work, you should allow for
the possibility of later access to the fire damper and removal of the release and control
mechanism in
order to carry out possible service work and technical inspections.
The mcr WIP fire dampers may be installed in the following space dividing elements (walls or structural floors):
masonry/concrete walls with a thickness of 120 mm brickwork
walls or concrete masonry unit walls with a thickness of 120 mm
walls made of boards with a thickness of 120 mm
structural floors with a thickness of 150 mm
Additionally, fire dampers may be installed:
outside walls
in dampers sets (multiple damper sets)
The mcr WIP type fire dampers may also be installed in space dividing elements in buildings that have a lower fire-
Optional fittings
Material
Trigger control gear
Width x height / diameter (nominal)
Damper type
