MERCARB 2 BARREL CARBURETOR
SERVICE MANUAL NUMBER 24
90-861327--1 OCTOBER 1999
Page 5B-11
Fuel Inlet Filter
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
REMOVAL
1. Remove fuel line from fuel inlet filter nut.
2. Remove fuel inlet filter nut and small gasket.
3. Remove large gasket.
4. Remove filter.
5. Remove spring.
6. Remove small gasket from inside filter nut.
72406
b
c d
e
f
a
a -
Fuel Line
b -
Fuel Inlet Filter Nut
c -
Gasket (Larger)
d -
Gasket (Small)
e -
FIlter
f -
Spring
CLEANING
1. Clean filter nut and spring in solvent and dry with compressed air.
INSTALLATION
1. Install spring in carburetor body.
2. Install filter, open end to inlet filter nut.
3. Install small gasket inside filter nut.
4. Install large gasket over filter nut threads.
5. Install fuel inlet filter nut. Torque nut to 18 lb-ft (24 Nm).
IMPORTANT: Hold filter nut with wrench while torquing fuel line.
6. Install fuel line. Torque to 18 lb-ft (24 Nm).
Index