FUEL INJECTION DISASSEMBLY AND REASSEMBLY
SUPPLEMENT TO SERVICE MANUAL NUMBER 24
90-861327000 JULY 2000
Page 5E-29
5. Torque the fasteners evenly in a diagonal pattern to 150 lb-in. (17 Nm).
75710
a
b
c
d
d
e
a -
Screws (6)
b -
Plenum
c -
Gasket
d -
Nuts
e -
MAP Sensor Location
6. Place remote control throttle lever in idle position. Attach cable to throttle lever stud.
Refer to SECTION 2 for throttle cable adjustment.
7. After throttle cable is adjusted, tighten locknut against cable end.
74838
a
b
c
a -
Cable End
b -
Throttle Lever Stud
c -
Locknut
8. Connect the harness connector and the vacuum hose to the MAP sensor.