FUEL INJECTION DISASSEMBLY AND REASSEMBLY
SUPPLEMENT TO SERVICE MANUAL NUMBER 24
90-861327000 JULY 2000
Page 5E-33
MAP Sensor
REMOVAL
1. Disconnect electrical connector at manifold absolute pressure (MAP) sensor.
00000
a
b
c
d
a -
Plenum
b -
Manifold Absolute Pressure (MAP) Sensor
c -
Vacuum Hose To Intake Manifold
d -
Screws (2)
2. Remove MAP sensor.
CLEANING AND INSPECTION
1. Clean off any foreign matter with a dry cloth.
2. Inspect for any obvious signs of physical damage to the sensor.
INSTALLATION
1. Install MAP sensor using screws. Torque screws to 44-62 lb-in. (5-7 Nm).
2. Connect electrical connector to MAP sensor.
3. Connect vacuum hose to intake manifold fitting.