Section 5 - Maintenance
90-899883182 NOVEMBER 2007
Page 63
6. Connect the oil removal pump onto the barb fitting attached to the oil drain hose.
26316
a
b
c
d
a -
Typical oil pump
b -
Adapter fitting
c -
Engine oil drain hose
d -
Pump drain hose
7. Pump the oil into an appropriate container until the crankcase is empty.
8. Remove the pump and the fitting.
9. Install the drain plug in the oil drain hose.
10. Replace the engine oil filter. See
Changing the Oil Filter
.
Changing the Oil Filter
NOTE: Allow the oil in the oil filter to drain back into the engine block prior to removing it
will prevent oil spillage when removing the filter.
1. Remove and discard the old oil filter and sealing ring.
26213
a
a -
Oil filter
2. Clean up any spilled oil with a shop towel.
Summary of Contents for Vazer 100
