Section 5 - Maintenance
90-899883182 NOVEMBER 2007
Page 71
13. Ensure that the rubber gasket is inside the gear lube monitor cap and install the cap.
Do not overtighten.
26217
a
a -
Gear lube monitor cap
NOTE: Oil capacity includes gear lube monitor.
Model
Capacity
Fluid Type
Vazer Drive
1892 ml (64 oz)
High Performance Gear Lubricant
14. Remove the pump from the oil fill and drain hole.
15. Quickly install the sealing washer and oil fill and drain screw. Tighten securely.
16. Recheck the gear lube level after the first use. See
Checking
.
IMPORTANT: Oil level in the gear lube monitor will rise and fall during sterndrive operation;
always check the oil level when the sterndrive is cool and the engine is shut down.
Power Trim Fluid
Checking
IMPORTANT: Check the oil level with the sterndrive in the full down (in) position only.
1. Place the sterndrive in full down (in) position.
2. Observe the oil level. Level must be between the "MIN" and "MAX" lines on the
reservoir.
26313
a
b
b
Power trim pump reservoir with fluid level between the "MIN" and MAX" lines
a -
Reservoir
b -
"MIN" and "MAX" lines
3. Fill as necessary with the specified fluid. See
Filling
.
Summary of Contents for Vazer 100
