600.107UK
•
Replace the battery as soon as the battery indicator appears. With a
low battery, the meter may produce false readings that can lead to
electric shock and personal injury.
•
Remove the connection between the testing leads and the circuit being
tested and turn the meter power off before opening the meter case.
•
The internal circuit of the meter shall not be altered at will to avoid
damage of the meter and any accident.
•
A soft cloth and mild detergent should be used to clean the surface of
the tester on a regular basis. No abrasive and solvent should be used
to prevent the surface of the tester from corrosion or damage.
•
The tester is suitable for indoor use only.
•
Turn the tester power off when it is not in use and take out the battery
when not using for a long time. Check the battery regularly; replace the
battery immediately if any signs of leaking appear. Battery acid will
damage the tester.
General Specifications
Max display:
LCD (1999 count) 1.25 inch
Polarity:
Automatic, indicated minus, assumed plus
Measure method:
double integral A/D switch implement
Sampling speed:
2 times per second
Over-load indication:
“1” is displayed
Operating Environment:
0ºC-40ºC, at <75%RH
Storage Environment:
-10ºC-50ºC, at <85%RH
Power:
9Vdc (1 x PP3 battery supplied)
Low battery indication:
“ ”
Dimensions:
190 x 85 x 35mm
Weight:
322g (including battery)
