background image

110 South Van Brunt Street
Englewood, NJ 07631
Phone (201) 568-4606
Toll Free (888) 568-4606
FAX (201) 568-7962
www.mercuryfloormachines.com

ISSA

The Experts

on Cleaning and Maintenance

®

MEMBER

MEMBER

SINCE 1958

©2006 Mercury Floor Machines, Inc.

HD-34 - page 8

Mercury Floor Machines, Inc

New Equipment Warranty

Limited Warranty

Year - Motors, Pumps and Electric Components.

1 Year- Service Labor

Mercury Floor Machines, Inc. warrants new equipment against defects in material and workmanship
under normal use and service to the original purchaser, and that the autoscrubber complies with the
technical specifications;. Any statutory implied warranties, including any warranty of merchantability
or fitness for a particular purpose, are expressly limited to the duration of this written warranty.
Mercury Floor Machines, Inc. will not be liable for any other damages, including but not limited to
indirect or special consequential damages arising out of or in connection with the furnishing,
performance, use or inability to use the machine. This remedy shall be the exclusive remedy of the
purchaser. The warranty period is subject to the conditions stated below.

Mercury Floor Machines Inc. warrants pumps, electric motors, electric component and transmissions
on all Mercury autoscrubbers to be free from defects in material and workmanship, under normal use

and service for

 one

(

1

) year to the original purchaser. Parts replaced or repaired under this warranty

are warrantied for the remainder of the original warranty period. Service labor charges are covered
for one (1) year from the date of purchase, when performed by a Mercury authorized-service
provider. Freight charges to and from this service providers will be covered for 90 days from the
purchase date. After this 90 day period, these freight charges will be paid by the equipment owner.
Travel expenses are not covered.

Normal wear items such as belts, brushes, bumpers, capacitors, carbon brushes, casters, clutches,
cords, finishes, gaskets, rectifiers, switches, squeegees, bearings, pulleys, relays, actuating cables,
wheels, and tires will be warranted for manufacturing defects for 90-days from the purchase date.

Warranties on batteries are serviced by the battery manufacturer.

All warrantees of motors and associated components will be voided; if the autoscrubber is serviced
by anyone other than a Mercury-authorized service provider; if the machine is mechanically
modified; if the machine is misused or abused; if incorrect repair parts are used in maintaining the
machine, or if the autoscrubber is incorrectly connected to a battery set, or if the battery set is
incorrectly connected to the charging system.

The warranty starts on the purchase date by the original purchaser from an authorized Mercury Floor
Machines, Inc. distributor, subject to proof of purchase. The Machine Registration Card must be
completed and returned immediately at the time of purchase. If proof of purchase cannot be
identified, the warranty start date is 90 days after the date of sale to an authorized Mercury Floor
Machines, Inc. distributor.

Warranty

MERCURY HD-34 AUTOSCRUBBER

Summary of Contents for HD-34








Reviews: