- 15 -
9.1.1 Optical I/O configuration
The following tables resume the I/O formats available in each mode. These formats are software selectable into Pyramix.
(A = Optical A / B = Optical B)
9.1.1.1 Standalone mode (also called Mono-board mode)
INPUT Modes
A/ ADAT Channel 1 – 8 (A) - ADAT Channel 9 – 16 (B)
B/
SPDIF Channel 1 – 2 (A) - ADAT Channel 9 – 16 (B)
OUTPUT Modes
A/ ADAT Channel 1 – 8 (A) - ADAT Channel 9 – 16 (B)
B/
ADAT Channel 1 – 8 (A) - ADAT Channel 1 – 8 (B)
C/
SPDIF Channel 1 – 2 (A) - ADAT Channel 1 – 8 (B)
D/ SPDIF Channel 1 – 2 (A) - ADAT Channel 9 – 16 (B)
9.1.1.2 HDTDM mode
INPUT Modes
A/ ADAT Channel 1 – 8 (A) - ADAT Channel 9 – 16 (B)
B/
ADAT Channel 1 – 8 (A) - ADAT Channel 1 – 8 (B)
OUTPUT Modes
A/ ADAT Channel 1 – 8 (A) - ADAT Channel 9 – 16 (B)
B/
ADAT Channel 1 – 8 (A) - ADAT Channel 1 – 8 (B)
9.1.1.3 XDTDM mode (from Pyramix v. 5.0 and higher)
INPUT Modes
NO INPUTS
OUTPUT Modes
ADAT Channel 1 – 8 (A) - ADAT Channel 1 – 8 (B)
Note:
The optical ADAT daughter card is supplied with two 2-meter optical fiber cables. Other length (up to 10 meter) can be
ordered from your authorized Merging dealer.
