background image

PREFACE

3

INTRODUCTION

The 800 also provides analogue progressive component video outputs, in 
addition to interlaced and NTSC/PAL encoded outputs. Picture controls 
allow you to adjust the aspect ratio, picture position (progressive only), 
brightness, contrast, and hue (NTSC only).

In addition to providing high-quality video outputs, the 800 has the ability 
to give help and system control information via an on-screen display.

Video inputs

The 800 Reference DVD/CD player also provides two composite, two 
S-video, and one interlaced component video input. All video sources are 
converted internally to a common broadcast-resolution standard digital 
video format. 

DVD-Audio

DVD-Audio discs now make music recordings available with signifi cantly 
higher quality than Audio CDs, with up to 24-bit resolution and up to 
192kHz sampling rate. The 800 Reference DVD/CD Player is capable of 
taking advantage of the highest-quality audio available on DVD-Audio 
discs, and by using the proprietary MHR (Meridian High Resolution) 
encoding scheme, in conjunction with Meridian DSP Loudspeakers, allows 
the signal to be preserved at full resolution and sampling rate until the 
latest possible stage in the reproduction chain.

DVD-Audio discs are also capable of offering multichannel audio. The 800 
DVD/CD Player can be fi tted with a multichannel digital output card to 
allow up to six discrete channels to be connected to Meridian DSP 
Loudspeakers, or a digital surround controller with discrete multichannel 
inputs such as the 861.

The 800 Reference DVD/CD Player also provides access to the range of 
additional features available on the DVD-Audio format, including still 
images and video sequences.

DVD-Video

The multichannel soundtracks on DVD-Video discs are encoded and 
compressed, using the Dolby Digital, MPEG, or DTS encoding systems. The 
800 Reference DVD/CD Player uses mathematically precise digital signal 
processing (DSP) to decode the soundtrack into discrete channels. The video 
is processed using broadcast-quality video circuitry, with the ability to 
reproduce both PAL and NTSC video formats and to convert between them 
if the television or video display is not capable of displaying both formats.

Summary of Contents for 800 Version 4




































































Reviews: