25
3. Adjust the receiver height to make the trailer
level with the tow vehicle. Tighten the bolts to
70 ft-lb (95 N·m) torque.
4. Remove the retainer pin. Release or open
the receiver by pulling the locking cover back
using the lever mechanism, as shown.
5. Slowly back the tow vehicle until the hitch and
ball are aligned.
6. Lower the hitch onto the ball.
7. Raise the jack and place it in its stowed
position.
8. Close the receiver locking collar using the
lever. Install the retainer clip to prevent
unwanted opening of the receiver.
Summary of Contents for Bulk Seed Tender Seed Express 225RST
