background image

DSP3300 User Guide

EN

EN

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type 
plug. A polarized plug has two blades with one wider than the other. 
A grounding type plug has two blades and a third grounding prong. 
The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly 
at plugs, convenience receptacles, and the point where they exit 
from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for 
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

This apparatus has been designed with Class 1 construction and 
must be connected to a mains socket outlet with a protective earthing 
connection (the third grounding pin).

This apparatus does not include a power switch. The apparatus may be 
isolated from mains power either by unplugging the power connector from 
the rear of the unit, or by unplugging the connector at the opposing end 
of the power cord or cable from its supply outlet. As a result, either or 
both of these connectors should remain accessible








  Safety warnings

Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a vase, on the unit.
Do not place naked flame sources, such as lighted candles, on 
the unit.
To avoid overheating leave at least 10cm around the equipment to 
ensure sufficient ventilation.
Do not position the unit in direct sunlight, near heat sources such as 
a radiator, or directly on top of heat producing equipment, such as a 
power amplifier.
To avoid interference do not position the unit near strong electrical or 
magnetic radiation, such as near a power amplifier.

Radio interference

FCC Warning

: This equipment generates and can radiate radio 

frequency energy and if not installed and used correctly in accordance 
with our instructions may cause interference to radio communications 
or radio and television reception. It has been type-tested and complies 
with the limits set out in Subpart J, Part 15 of FCC rules for a Class 
B computing device. These limits are intended to provide reasonable 
protection against such interference in home installations.

EEC

: This product has been designed and type-tested to comply 

with the limits set out in EN55013 and EN55020.

Copyright

Meridian Audio Ltd 
Latham Road 
Huntingdon 
Cambridgeshire 
PE29 6YE 
England

Copyright © 2011 Meridian Audio Ltd.

Visit us on the Web: 
http://www.meridian-audio.com

Part no: DSP3300 (P88398)

This guide was produced by: Human-Computer Interface Ltd,  
http://www.interface.co.uk/



Summary of Contents for DSP3300









Reviews: