9
Assembly Step
Picture 2
1.
Attach weight plate(#27) to the weight guide tube(#5) by turn( groove side is under)
，
attach
weight plate bar pushing(#30) to the weight plate bar(#31), make the holes in the right position.
Attach weight plate latch (#29) to the holes of the weight plates.
2.
Attach weight plate top cover (#26) to weight plate bar(#31) and weight plate bushing(#30),
using big flat washer
Φ
12
（
#28
）
to the weight plate top cover (#26), and put L latch
（
#33
）
to
weight plate bar(#31).
3.
Attach front upright
（
#4
）
to Front bottom frame
（
#2
）
, using 3pcs M10x100 hex bolts(#71), 6pcs
flat washers
Φ
10
（
#56
）
and 3pcs M10 nuts
（
#75
）
.
4.
Attach upper cross beam(#8) to the connection plate
（
#17
）
, using 2pcs M10x60 hex bolts
（
#68
）
,
4pcs flat washers
Φ
10
（
#56
）
, 2pcs M10 nuts
（
#75
）
. Attach upper cross beam(#8), back cross
beam(#54) to weight guide tube(#5), using 2pcs M10x25 hex bolts(#65) and 2pcs flat washers
Φ
10
（
#56
）
.
5.
Attach pulley U (#21) to Pulley single U frame(#4), using 1pce M10x65 hex bolts(#69), 2pcs flat
washers
Φ
10
（
#56
）
and 1pce M10 nut(#75).
