9-7
October 2014 | Revision 1.0
Meridian Manufacturing, Inc.
8. Allow the engine to cool for at least 15
minutes, with both compartment doors open,
before towing.
WARNING
To prevent a fire, which could lead
to personal injury or death, allow
the engine to cool before closing
the engine compartment doors. A hot engine
and exhaust system could ignite various
materials within the front compartment.
9.4.4
Filling the Trailer’s DEF Tank
Review the section on DEF Solution in this
manual before filling the DEF tank or servicing the
machinery.
1.
Fill the DEF tank using the fill port. The fluid
level will be evident through the side of the
white poly tank. Do not overfill the tank.
NOTICE
Observe the fluid level through the side of the white
poly tank. Do not overfill the tank.
Note:
Ensure breather on top of the tank is not
blocked and is properly tightened.
Note:
To prevent contamination of the DEF fluid,
keep the DEF nozzle and the fill port clean
and free of dust and dirt.
9.4.5
Filling the DEF Tank on
Machinery
The DEF transfer pump (1) is a 12 Volt DC,
self-priming, positive-displacement vane pump.
Note:
If the pump does not operate, make sure
the in-line fuse is working.
SAFETY
INSTRUCTIONS
This pump should only be used to pump DEF
solution from the fuel trailer to the machinery being
serviced. Do not pump any other type of fluid.
1. Ensure the power switch on the DEF pump is
in the OFF position.
(1) DEF Pump. (2) DEF Nozzle. (3) Fuse - 20 Amp.
(4) Fill Plug.
Chapter 9 | Operation
