Media Core 200
User Guide
EN
EN
To connect to an analogue preamplifier or
Meridian Digital Controller
The Media Core 200 can be used as a digital music source in a
system with an analogue preamplifier, a Meridian AC200, or a
Meridian Digital Surround Controller such as the G68.
You can browse and control music on the system using the
Sooloos application on an iPad, iPhone, or iPod Touch, or the
Control:PC/Control:Mac application on a computer.
Connect the Network socket to one of the LAN network
connections on your Router, using a CAT5 cable.
Make sure the WAN/Internet port on the Router is connected
to the rest of your network, or to your Cable/DSL Modem.
Use the Meridian Sooloos Configuration application to set
the Media Core 200 to Fixed Output, so the volume will be
controlled by the preamplifier or controller.
•
•
•
If you are using a Meridian Digital Controller with a SpeakerLink
input, such as the Audio Core 200:
Connect the Media Core 200 SpeakerLink output to the
Audio Core 200 SpeakerLink input, using a Meridian
SpeakerLink lead.
If you are using a Meridian Digital Surround Controller, such as
the G68:
Connect the Media Core 200 Digital Out connector to one of
the G68 digital inputs, using a digital coax lead.
If you are using an analogue preamplifier:
Connect the Media Core 200 Analogue Out connectors to
one of the preamplifier line inputs, using a stereo phono lead.
•
•
•
Meridian Audio Core 200
SPEAKERLINK
IN OUT
ANALOGUE
SPEAKERLINK
DIGITAL
SpeakerLink lead
Media Core 200
NETWORK
Router
Internet
Summary of Contents for Media Core 200
Page 1: ...Media Core 200 User Guide...
