Setting up the digital surround processor
53
Digital audio inputs
The following table gives details of the digital audio inputs:
Use this input
To connect to this
CD/D1, DVD/D2,
A digital source, such as a CD player,
CDR/D3, TAPE2/D4
DVD player, digital tape recorder, or
digital television tuner.
LD/01
A digital-optical source, such as a
LaserDisc player, the 519
Demodulator, or a CD player with no
digital-cable output.
The digital connections should be made with high-quality 75
Ω
screened cable. Suitable cables are available from Meridian. We
do not recommend using audio cables, which do not have
adequate shielding or the correct impedance, or cables intended
for UHF applications, as these do not provide adequate
shielding in the 1–30MHz region.
Optical connections should be made using a suitable optical
fibre supplied by your dealer.
Analogue audio inputs
The following table gives details of the analogue audio inputs:
Use this input
To connect to this
TV/A1, RADIO/A2
An analogue source such as a
radio tuner, tape recorder, TV
tuner, or cable television.
The analogue connections should be made using high-quality
screened cable, taking care to connect the left and right
channels correctly.
Summary of Contents for Meridian 568
