Page 10
This card has additional features that can be monitored in a window displayed using
SpectraSmart by right clicking on the image of the card and then clicking from
dropdown menu ”Card Status”. See the Card Status screen display below.
When the front DIP switch position 5 is ON – remote mode (SpectraSmart control
enable) the user can set ports active status to card.This information will be sent to
the card and stored in non-volatile memory.
For checking these functions in detail, click the right mouse button on the front
panel image of the card and choose “Parameters” from the dropdown menu. This
will display these various card parameters for viewing and modification.
The “Current parameters” screen below shows the various card parameters and
operating condition settings. The center numbers show the actual (real-time) value
as well as min and max values that SpectraSmart has measured for each.
