COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Troubleshooting Information - CMOS Setup
Megatouch MAXX Technical Reference Manual
CMOS Configuration Procedure for Megatouch MAXX
The CMOS configuration should only be performed if your Megatouch MAXX game experiences problems
booting up.
MITSUBISHI/ITOX MOTHERBOARD CMOS CONFIGURATION:
1.
Make sure the game is turned off.
2.
Plug in your keyboard.
3.
Turn on the power.
4.
Press F2 to enter Phoenix BIOS Setup Utility.
5.
Press F9 to load Setup Default.
6.
At Setup confirmation, press ENTER with YES shaded.
7.
Press F10 to save and exit
8.
Press YES for confirmation.
9.
Unplug the keyboard
TELCO 586 MOTHERBOARD CMOS CONFIGURATION:
1.
Make sure the game is turned off.
2.
Connect your keyboard to J4 on the motherboard assembly.
3.
Turn on the power.
4.
Select LOAD SETUP DEFAULTS.
5.
Press ENTER.
6.
Press Y for YES.
7.
Press ENTER.
8.
Select STANDARD CMOS SETUP.
9.
Press ENTER.
The Settings should be as follows:
Date: Current date
Time: Approximate time
Hard Disks: All TYPE and MODE fields set to AUTO
Drive A: 1.44M, 3.5 in.
Drive B: None
Floppy 3 Mode Support: Disable
Video: EGA/VGA
Halt On: All but keyboard
10. After all settings have been changed or verified, press ESC.
11. Press F10.
12. Press Y for YES.
13. Press ENTER. Configuration is now complete--the system should reboot.
14. Unplug the keyboard.
UNICORN MOTHERBOARD CMOS CONFIGURATION:
1.
Make sure the game is turned off.
2.
Connect your keyboard to J4 on the motherboard assembly.
3.
Turn on the power.
4.
Select LOAD SETUP DEFAULTS.
5.
Press ENTER.
6.
Press Y for YES.
7.
Press ENTER.
8.
Select STANDARD CMOS SETUP.
