The BlueFIRE Monitor has two mounting options:
1. Pole Mounting:
The BlueFIRE pole mount (part
number IN10POLE) may be clamped to any
round or square tube from 0.5” to 2”. To connect
the Monitor to the clamp, loosen the Monitor
thumb screw until the socket fits onto the ball
on the clamp, position the Monitor, then tighten
the thumb screw.
2. Table Mounting:
The BlueFIRE table mount
(part number IN10TABLE) may be inserted into
the edge of a surgical table. To connect the
Monitor to the table mount, loosen the Monitor
thumb screw until the socket fits onto the ball
on the clamp, position the Monitor, then tighten
the thumb screw.
BlueFIRE_UserManual2.indd 4
10/20/2017 2:51:24 PM
