4
Mount the Wing
Slide the unassembled wing into the opening in the fuselage.
Locate the wing at its center and carefully mark the interface of the wing and fuselage with a permanent
marker.
Remove the wing and carefully trim out the covering of the wing that will be under the fuselage. Expose
the wood underneath but be careful not to damage it. Trim away any cover material that is inside the wing
slot of the fuselage. Reinstall the wing through the fuselage. Recheck that the wing is centered. Use a
square to check that the wing is perpendicular to the fuselage. When you are satisfied with the alignment,
use a thin coat of 30 minute epoxy to glue the wing in the fuselage. Wipe up any excess adhesive.
