background image

Caution:
1. Before every journey, make sure that the 
rotating part of the child seat is fully engaged 
by trying to turn the seat around in both 
directions.
2. Do not use the child seat forward facing 
when your child is below 9 kg.

Caution:
Before every journey, make sure that the child 
seat is in the right group and configuration for 
your child.

1. Grasp the turning knob 

8

 whilst pressing the safety 

button 

10

 simultaneously, turn to the lowest recline 

position.

2. Pull the rotation handle 

14

 and turn the seat into the 

direction of travel.

Pull the rotation handle 

14

 and turn the seat into the 

correct direction of travel.

TIP: Grasp the turning knob 

8

 whilst pressing the safety 

button 

10

 simultaneously, change to the lowest reline 

position for group 0+.

A) Rotation function (from rearward to forward facing)

B) Rotation function (from forward to rearward facing)

10

8

14

10

8

14

13

14

This child car seat rotates 360° which makes it easier 
to get your child into or out of the child seat (Easy 
access function).

Pull the rotation handle 

14

 and turn to 90°and into easy access mode.

Caution:
When the child seat in group 0+ mode, it can be only 

turned to 90°,when the child seat in group I mode, it can 
be turned 360°

6. Side facing installation

Important:
The cover is a safety feature. Never use the child car seat without it, don’t put your 
child’s safety at risk by using other replacement covers, they could stop the child 
seat from protecting your child as well as it should.

Washing instruction:
The cover is removable and washable at 30°C, line dry only.

7. Cleaning and Maintenance

Machine wash, cold

Do not bleach

Do not dry clean

Do not tumble dry

Do not iron

14

Summary of Contents for CozyNSafe EST-101











Reviews: