3
Important safety instructions for
use
WARNING
It is important for the safety of persons to follow all the instructions for
use. Save these instructions.
Controls are not a toy
Do not allow children to play with fixed or remote controls.
Check the gate and drive for wear
Frequently examine the installation for imbalance and signs of wear or damage.
Check that the manual release functions correctly.
Do not use if repair or adjustment is necessary.
Test the safety system every month
Every month, test that the gates stop or reverse in response to an obstruction, and that
interrupting the beam of and photo-electric safety beam also causes the gate to stop or
reverse..
Do not use if repair or adjustment is necessary.
Disconnect power before maintenance
Always disconnect the power supply from the drive before cleaning or maintaining the
gate or drive. The drive or gate may operate unexpectedly due to other users with remote
controls, or due to automatic closing (if enabled).
Become familiar with the controls and manual release before use
Before using the gate and drive, locate the manual release and become familiar with its
operation. Note where the key is located, in the case of a power cut or any failure of the
drive or gate.
Contents
Manually opening the gate
4
Maintenance
4
Learning wireless controls
5
Deleting all wireless controls
5
Deleting selected wireless controls
5
Site requirements
6
Installation
9
Board setup
12
Make all connections
12
Set the application mode
15
Learn a remote control
15
Easy setup
16
Controls
17
Professional setup
21
Testing the gate operation
22
Troubleshooting
23
Specifications
24
Warranty
25
Service Centres
26
Quick setup guide
27
Commissioning check sheet
28
