G815
D
May 05
4
Manually opening the gate
You can release the gate from the
opener. Insert the key into the lock
on the underside of the opener. Turn
the key and pull the lever down. The
gate will be released from the drive.
To reconnect the gate to the drive, it
may be necessary to move the gate
back to the same position as where
it was before unlocking.
Maintenance
In an area where ant or insect infestation is likely, regularly spray around the opener and
any electrical installation with insecticide. In normal conditions it is not expected that any
additional lubrication or service is required. Keep the path of the gate free from debris and
foliage.
The gate and its moving parts may sustain damage or wear, presenting additional load to
the opener. Frequently examine the installation for signs of wear or damage. Do not use if
repair or adjustment is needed as the gate may cause injury.
Each month check the sensitivity of your gate while it is closing and opening. Arrange
for an Authorised Installer to adjust if necessary since an incorrect adjustment may be
hazardous.
Each month check that any non-contact beam sensors function correctly by obstructing
them while the gate is moving. The gate should stop, or reverse. Ensure the beams are
clear of any obstructions or dirt and ensure they are aligned towards each other.
Insert key, turn
and pull the
lever down to
release the drive.
