14
PROGRAMMING
TRAVEL SPEED (OPTIONAL)
19
CONTROL PANEL E-LOCK (OPTIONAL)
20
DN
DN UP
UP P
P
S
S
1
1
2
2
3
3
132A2940
DN
DN UP
UP P
P
S
S
1
1
2
2
3
3
132A2940
Flash
x 1
Flash
x 2
BEEP
BEEP
SLOW
SPEED
REGULAR
SPEED
DN
DN
UP
UP
P
P
S
S
1
1
2
2
3
3
132A2940
Flash
x 2
BEEP
E-LOCK
or
There are two travel speeds available for this opener.(Regular and
Slow speed)
The WeatherDrive MR555MYQ has been factory set for regular
speed.
Setting the SLOW SPEED:
• Start with the door fully OPEN.
• Press and Hold both “UP” and “DN” buttons for 3 seconds.
• The Courtesy light will flash “ONCE”. Release both buttons.
To return to REGULAR SPEED:
• Start with the door fully OPEN.
• Press and Hold both “UP” and “DN” buttons for 3 seconds.
• The Courtesy light will flash “TWICE”. Release both Buttons.
The WeatherDrive MR555MYQ has been factory set with the
Control Panel buttons UNLOCKED.
After all the Installation and programming processes are complete,
the Control Panel buttons can be locked, and all the coded
transmitters will remain active.
To Lock the Control Panel:
• Start with the door fully OPEN.
• Press and Hold both “S” and “UP” buttons for 3 seconds, while
pressing a previously coded transmitter.
• The Courtesy light will flash “TWICE”. Release all the buttons.
The control panel is now LOCKED, and pressing any button will
only allow the courtesy light to turn ON. Transmitters remain active.
To turn the Control panel back ON, simple repeat the above
process using any previously coded transmitter.
