6 - ORDINARY MAINTENANCE
6 - 13
PERIODIC MAINTENANCE SCHEDULE
COMPONENT
* EVERY 10 HOURS
OPERATION
Hydraulic oil
Check level and top up
Hydrostatic transmission oil
Check level and top up
Engine cooling system
Check level and top up
Tyres and wheel bolts
Inspect
Safety belts
Inspect
COMPONENT
* EVERY 50 HOURS
OPERATION
Boom sliding pads (Internal)
Grease
Reduction hub articulation
Grease
Brakes pads
Check wear
Tires and stud bolts
Check pressure and stud bolts tightening
Air ventilation filter
Clean
Diesel pre-filter (only for DEUTZ engines)
Drain water
Engine air intake hoses
Check connections
Battery
Check electrolyte level and terminals
Engine air filter
Clean
Brake fluid
Check level
Sliding pads of the telescopic boom (outer pads)
Check
Plunger for quick uncoupling of attachments
Grease
COMPONENT
EVERY 500 HOURS
OPERATION
Hydraulic oil tank bleeder filter
Replace the filter
Reduction hub oil
Check level
Differential oil
Check level
Gear box oil
Check level
Cap screws and bolts
Check tighten
Universal joints
Grease
Fuel tank
Drain water and sediments
Hydrostatic transmission oil filter
Replace
Hydraulic oil filter on return line
Replace
Engine air filter
Replace the filter
Sliding pads of the telescopic boom (inner pads)
Check
Pipeline guide pipe (only for models P40.9PLUS –
P60.10 – P60.10EE – P72.10 – P72.10EE)
Check
Diesel pre-filter (only for KUBOTA engines)
Check
Chain transfer unit oil (only for DEUTZ engines)
Check level
COMPONENT
EVERY 1000 HOURS
OPERATION
Articulated joints
Check the play and grease
Boom sliding pads (External)
Grease
Anti-dust filter
Replace
Hydraulic pipes/hoses
Inspect
COMPONENT
EVERY 1500 HOURS
OPERATION
Hydrostatic transmission oil
Replace
Hydraulic oil
Replace
Gear box oil
Replace
Differential oil
Replace
Reduction hub oil
Replace
Brake fluid
Replace
Summary of Contents for PANORAMIC
