Merloni Elettrodomestici
55 CM WIDE BUILT-IN FRIDGE-FREEZERS
Technical Manual
I
04-10-22/01
8-33
Language
Issue/Edition
Page
2. Fridge Lamp and Fridge Door Switch
INFORMATION:
How It Works
: the lamp can only be switched on with the appliance ON and the
fridge door open. After the fridge door has been open for 2 minutes the lamp starts
flashing and an acoustic alarm sounds. After 4 minutes the flashing becomes quicker.
POSSIBLE CAUSE OF MALFUNCTION:
Microcontroller management
Refrigerator door circuit input on the board
Lamp driver circuit on the board
Connection on the board
Wiring
Connections on the lamp
Connections on fridge door switch
Lamp
Fridge door switch
TESTING:
General on the appliance
: switch on the appliance, open the door and verify that the
lamp switches on.
carry out the check using the Autotest procedure.
Wiring:
check for continuity and short circuits; check the connections (connectors and
terminals); check for presence of voltage.
Component
: visual check of the lamp; direct check of the lamp (powered directly);
check by using a replacement lamp. One possible cause of incorrect lamp functioning is
a problem with the fridge door switch.
Electronic board
: visual check and quick check of the board (blowouts or burnouts,
etc.); check by using a replacement.