8
13
9
9
10
11
12
13
Step 8
Drill 5 equally spaced holes
with 3mm drill bit
8S1301152
through the nylon clip
8SSJ037,
wall profile and
frame.
Step 9
Fix the frame with screws
8S410047
. The door spacers
can now be removed.
FIXING FRAME TO WALL PROFILES
5
Step 10
The door panel when closing
should meet the top and
bottom ball catches at the
same time. If not, loosen the
screw fixing the wall profile
to the wall and adjust the top
or bottom of each wall profile
in or out until the door closes
evenly. Tighten the wall
fixing screw.
Step 11
The ball catch can be
adjusted in and out to
ensure the door panel
closes smoothly. Do not
adjust out the ball catch
too much.
Step 12
Attach the wall profile
trim strip
8SAL0002
.
Step 13
Fix the upright cover caps
8SSJ035L/R
and wall profile cover caps
8SSJ036L/R
with screws
8S410045
.
Summary of Contents for 8 Series
Page 1: ...Hinge Door Hinge Door ...
