3
4
Step 1
Step 2
Step 3
IMPORTANT!
Whether fitting on a tray or on a tiled
Wetroom the tray or floor must be 100% level
!
WARNING ! Note the wall profile is used as a template to mark the hinge
hole positions and the step in distance for template is different for marking
hinged panel and inline panel positions.For hinges step in is 49mm and inline
panel bracket step in is 64mm.Make sure you note the handing before you
proceed.
100% level
!
49mm
Hinge fixing side
64mm
Side panel side
For the door side mark a line inwards 49mm from outside edge of tray.For
Side panel side mark a line 64mm from the outside of the tray.
Note the position of the labels on the wall profile.Make sure Label 'T' is to the top
and 'B' is to the bottom. Line up the outside edge of the profile with the mark and
plumb vertical. Mark the wall through the pre-drilled holes.
B
NOTE: Do not fix wall profile as
these are the fixing points for
the hinges and wall brackets.
B
B
T
B
B
T