Remove hinge back plate and gasket.
Please note:
Door panel is reversable for left or right handing !
Step 17
Place locating aids on threshold, one each side of opening. Lift
door onto lacating aids.
Track
Door
Step 19
Step 16
Fit closing seal MGVC41 to the side panel. Make sure the fin is on the inside.
Using 4mm hex key fully tighten bracket to glass.
11
12
INSIDE
INSIDE
Step 18
Fit hinge to door keeping removable hinge plate to inside of door.
Tip: Use MDF tool for squaring hinges.
Please note:
Place screws and screwdriver inside enclosure as door is fixed from
the inside.
INSIDE
4mm ALKEY
locating aids
Tip! Hold both locating aids in
position with masking tape.