To fit bottom seal push on end with 45
°
cut tight to corresponding cut in
vertical seal. Notch fin to end of bottom seal where it meets the closing seal.
To remove bottom positioning aids open door outwards.
Loosely fix hinges to wall starting at the top. If needed insert packers provided
behind hinge plate to ensure even gap from top to bottom between closing edge
of door and side panel.
Step 20
Step 21
Left and right hand seal kits are provided, determine handing and use appropriate
seal kit. Left hand model shown below. Push on longest seal between hinges onto
back edge of door keeping fin to inside. Take seal with 45
°
cut and fit to bottom of
door keeping 45
°
cut to bottom. Fit remaining seal to top.
Step 22
Step 23
13
14
INSIDE
23A
INSIDE
23B
INSIDE
23C
INSIDE