(dashed line)
:
8.
Fix the wall profile cover
MOBY002L/R
.
FIG 8
FIG 8
www.merlynshowering.com
7.
Fit shelf glass bracket to glass, level shelf in both directions and mark fixing point on wall.Use 6mm masonry bit and then insert
the 2 wall plugs
2SP12
and fix the shelf wall brackets
MOBY006
to the wall with screws
2SY51
.
Tighten shelf glass bracket
MOBY005
onto the glass.Insert the perspex shelf
MOBY004
into the shelf wall bracket and shelf glass bracket.Then tighten
grubscrews.Fig 6.
FIG 6
Sealing. Fig 6
Inside
When installation is complete seal the joint between the wall profile and the wall, top to bottom on the
inside only. DO NOT SEAL where the wall profile sits on the Bath.
Outside
(full line)
From outside the screen, SEAL where the wall profile and hinge bracket sit on the bath. Seal 50mm up
where the wall profile meets the wall and where the hinge upright and the wall profile over lap.
FIG 6
FIG 7
8.
Fix the towel rail
BSYS025C
. Fig 7
Top view
