21
21.1
21.2
Maintenance operations should be carried out by a qualified
professional.
Be careful also not to damage the refrigerator system circuit.
7
ROUTINE MAINTENANCE
GB
Cleaning the outside
of the appliance
-
Clean the external part with a damp cloth, do not use solvents or abrasive deter-
gents
CO2 cylinder
replacement
-
Close the CO
2
cylinder.
-
Disconnect the pressure reducer.
- Fit
the
cylinder
on
as
described
in
the
Installation
chapter
When it drains (check on mano-
meter 6)
Tray cleaning
-
Clean the tray and remove any residue that could obstruct the drain pipe
(where present).
Every week
Cleaning the mechanical water filter
(TOP and GROUND models)
- Disassemble
the
inlet
pipe
fitting,
pull
the
filter
using
pliers
and
remove
any
impurities
(fig.21).
Every month
Cleaning the fridge condenser
- Remove any dust or dirt using a vacuum cleaner or similar appliance
- Do not use compressed air jets.
- Do not use metal brushes.
Every month
Cleaning the water dispensing
spouts
- Remove the steel nozzle nozzle using the appropriate spanner and eli-
minate all the limestone with a food descaling solution (fig.21.1 - 21.2).
Depending on the hardness of the
water from the mains
Descaling the carbonation pump
(WG versions)
- Take down the pump from the unit and remove scaling using a food-safe
descaling solution
Depending on the hardness of the
water from the mains
16
