9
Light Installation
Light Plate
LED Light Kit
Magnetic
Suction-Cup Bolt
Shade
Bolt
Wire Plug
The LED light has 3 different color settings: Warm White (3000K), Daylight (4500K), and Cool
White (6000K). To adjust the light settings,
1. Press
LIGHT
on the remote control to turn on the LED light.
2. Press
LIGHT
again to turn off the light.
3. Press
LIGHT
to turn on the light once more with the next color temperature in order.
Repeat these steps to toggle among 3 color temperatures.
Color Temperature Adjustment
Step 1.
Remove the bolt from the bottom of
the fan motor.
Step 2.
Feed the wire plug of the fan motor
through the middle of the light plate.
Install the light plate onto the motor and
secure it by replacing and tightening
the bolt.
Step 3.
Connect the LED light kit to the light
plate using its magnetic suction-cup
bolt.
Step 4.
Connect the wire plugs of the LED light
kit to the wire plugs of the fan motor
(blue to blue and white to white).
Step 5.
Fit the shade onto the light plate,
screwing it into place. Ensure it is firmly
connected to avoid loosening during
use.