Merry Products CAT WASHROOM BENCH MPCB006 Manual Download

Page: 5 / 5

STEP 8

STEP 9

Slide Divider (C3) into desired location.

Attach Left Door (D1) and Right Door (D2) using 8 Screws (M)

onto the pre drilled holes.

CARE INSTRUCTIONS

Thank you for choosing MERRY PRODUCTS’™ PET HOUSES AND PET BEDS. With little care and

maintenance, MERRY PRODUCTS’™ PET HOUSES AND PET BEDS will provide your pet with comfort and
enjoyment for many years to come!

•

To clean panels, use clean water on a damp cloth.

•

When assembling MERRY PRODUCTS’™ PET HOUSES AND PET BEDS, please handle all

panels and/or hardware with care to avoid any possibilities of damages and/or injuries.

Merry Products, Corp.

Page 5

v.1.

Summary of Contents for CAT WASHROOM BENCH MPCB006

Page 2: ... Bottom Board A2 STEP 1 J Locking bolt x4 K Wooden Dowel x6 K Wooden Dowel x4 STEP 2 Insert 4 Locking Bolts J into side panels C1 C2 as shown below 2 on each panel STEP 3 Insert 4 Wooden Dowels K to connect Back Panel B to Side Panels C1 C2 Page 2 v 1 ...

Page 3: ...carefully lower Back Panel B and sides C1 and C2 onto Bottom Board A2 I Cam x11 L Cover x11 Insert and tighten 11 Cams I being careful not to overturn Apply 11 Covers L to installed Cams Only slight turn of Cams required Do NOT overturn Page 3 v 1 ...

Page 4: ...t turn of Cams required Do NOT overturn Insert 6 Wooden Dowels K into Top Panel A1 and carefully lower onto assembled bench base Insert 7 Cams I and tighten carefully Place Covers L over installed Cams J Locking Bolt x7 Page 4 v 1 K Wooden Dowel x 6 I Cam x7 L Cover x7 ...